Ideal Distributors Limited - Copper Silver Ion and Residential use

Residential Pools & Spas

IDS ion systems can be used as a primary or supplemental sanitizer in residential swimming pools and spas.

Here is some background information. In the 1960's and early 1970's, the Johnson Space Center and NASA conducted a research program aimed at the development of a small, lightweight water purifier that required minimal power and no astronaut monitoring. They developed an electrolytic silver ion generator only slightly larger than a pager and weighing only nine ounces. These systems, mounted at various locations in the potable water supply and waste water system of the spacecraft, would dispense silver ions sufficient to eliminate bacteria and purify the water within a few hours.

This information was made available to the industry and from this beginning, one of the world's most advanced water purification systems was developed. It is capable of handling water volumes into the millions of gallons and used in many different applications. Pools and spas, fountains, cooling towers and injection molding systems routinely use ionization as a means of water sanitation.

In very basic terms, the IDS ion system works as follows. An anode, made of a proportion of copper and silver, and cathode are placed in a chamber. This chamber, or flow cell as it is more commonly called, is mounted in the recirculation system. A controller sends signals to the anode causing microscopic particles (ions) of copper and silver to be dispensed into the water as it passes through the flow cell. The copper destroys the algae and bacteria by piercing the outer membrane and disrupting enzyme balance. Silver is effective as a sanitizer because of its efficiency in interrupting DNA production preventing reproduction and accelerating the death phase of the bacteria and viruses. It has been proven to be very effective in its ability to destroy legionella, a particular concern in hot water applications. While lethal to bacteria, many viruses and algae, the system is completely safe for humans, animals and plants.

Operation of the system is virtually automatic and very simple. Once the system is installed, it is turned on to mid level to start dispensing ions into the water. A requirement of ionization is that there be some TDS level present to allow the process to take place. This is generally not a problem as most water has some mineral content and the standard water balance provides a suitable level. After a day or so, a copper test is performed to determine the copper level in solution. We suggest an initial reading of .3 ppm be reached. If that level is present the controller is left as is. If the level is low, the system is turned up slightly, or if the level is exceeded, the system is turned down. This is a start point and the levels can be adjusted from there to achieve the desired results. We recommend the testing be done every couple of days until an effective level is achieved. After that, a weekly reading is usually sufficient.Based on results from this test, the controller is adjusted to maintain the correct ion levels.

There are a number of advantages to the system. Unlike standard sanitizing chemicals, ions are relatively unaffected by pH, temperature, aeration or sunlight. As they are not as prone to evaporation or dissipation, they tend to remain resident in the water to provide longer lasting and more constant purification. New ions are added automatically as the water circulates. Operating costs and maintenance are low. From a health standpoint, it is completely safe as no toxic chemicals are produced or consumed. The system is environmentally friendly. The water is healthy, sanitary and odor free. Water quality is improved dramatically. The water feels fresh and clean with no chemical smell. Ion systems are ideal for those who are allergic or very sensitive to standard sanitizing chemicals. It is non corrosive. It is chemically neutral, so water balance is often easier to maintain. The system is not difficult to install and basic operation is easily learned.

Ion systems are often used in conjunction with other methods of sanitation including ozone and ultraviolet systems for improved performance. The report on this dual stage method of sanitation shows improved performance can be achieved from chlorine by combining it with an ion system.

See the FAQ section for answers to some of the more frequently asked questions.

250 MPC | 350 MPC | 450 MPC | 1000 MPC | 250/450 Setup | 1000 Setup | FAQ's

<<<Home>>>